Solar Permit Solutions
Fort Collins, CO

Solar Permit Services In Fort Collins, CO

Professional solar permit design and engineering services in Fort Collins, CO. Permit-ready plan sets delivered fast.

PE Stamped Plans
2-5 Day Turnaround
All 50 States
NEC & IBC Compliant
infographic outlining the solar permitting process in Fort Collins, CO, including requirements, documentation, application, inspection steps, and professional benefits.

Solar Permit Ready Plans in Fort Collins. Delivered.

A solar permit package needs to reflect the proposed system, the property, the equipment, and the requirements of the authority reviewing the project. SPS helps assemble the technical drawings and supporting documentation needed for your solar permit application.

Depending on your project and selected package, services may include:

Site Plans and Solar Layouts

We prepare site plans showing relevant property features and proposed solar equipment locations. Depending on the project, these may include the building footprint, solar array placement, property boundaries, equipment locations, and other details needed for review.

Electrical Plans and Single-Line Diagrams

Electrical documentation may include a single-line diagram (SLD), equipment specifications, conductor and overcurrent protection information, and other applicable system details. The design is based on the project information and equipment provided.

Structural Calculations and Mounting Details

Where required, structural documentation may address roof loading, solar attachment details, wind and snow loads, or ground-mount support and foundation details. Engineering calculations, letters, and seals depend on the project’s requirements and the scope of the selected service.

Professional Engineering Support

Some solar permit applications require drawings or calculations signed and stamped by an engineer licensed in Colorado. SPS can coordinate professional engineering services when required and included in the project scope.

Battery Storage Documentation

For projects with energy storage, the plan set may need to identify battery equipment, locations, electrical connections, and applicable safety details. Additional building, electrical, fire, or utility requirements may apply depending on the system and installation.

Plan Revisions and Review Comments

If the reviewing authority requests changes to drawings covered by your service package, SPS can assist with applicable revisions within the agreed scope. Additional engineering, redesign, or services outside that scope may require a separate quote.

Understanding Solar Permits in Fort Collins, Colorado

Solar projects in Fort Collins may involve separate building-permit and utility-interconnection processes. Preparing the drawings for one process does not automatically complete the other.

The exact requirements depend on the project type, property, equipment, and applicable local rules. Always check the current requirements for your project before submitting plans or beginning installation.

1. City of Fort Collins Building Permit

The City’s published requirements for a new solar PV installation identify several items that may be required, including

  • A site plan.

  • A roof plan for roof-mounted systems.

  • A solar panel layout.

  • Structural engineering addressing wind and snow loads, attachment details, and roof loading for roof-mounted systems, signed and stamped by a Colorado-licensed engineer.

  • Engineered electrical drawings, including a single-line diagram, signed and stamped by a Colorado-licensed engineer.

  • A solar PV permit application and applicable supporting forms.

  • Fire access and clearances, along with a separate Poudre Fire Authority permit where required.

The required documents may differ for residential, commercial, battery-only, and other project types. Review the City of Fort Collins Building Permits page for current instructions.

2. Fort Collins Utilities Interconnection

Connecting a solar system to the utility grid involves a separate application process through Fort Collins Utilities. The utility uses PowerClerk to manage interconnection applications for solar and battery systems.

Depending on the application, supporting documentation may include:

  • An electrical system design diagram.

  • A site diagram showing equipment locations.

  • Equipment specification sheets.

  • A shading report if the site is shaded between 9 a.m. and 3 p.m.

  • A copy of the contract or warranty.

  • The customer-signed Solar Fact Sheet and applicable purchase or lease disclosure.

Review the official Fort Collins Utilities Solar Contractor Resources for current interconnection documentation and process instructions.

3. Contractor Registration and Incentive Requirements

The City states that contractors installing solar PV or solar thermal systems must be registered with Building Services as specialized trade contractors. Homeowner projects may have different documentation requirements, so confirm which rules apply to your project.

Fort Collins Utilities also has a Participating Solar Contractor Network for eligible residential solar and battery incentives. Participating in that network is a separate consideration from preparing permit drawings. Customers seeking incentives should review the current eligibility requirements on the Residential Solar and Battery Storage page.

How the Solar Permit Process Works

Although requirements vary by project, a typical workflow looks like this:

  1. Share your project details. Provide the property location, system size, proposed equipment, roof or mounting information, and any available plans or site photos.

  2. Confirm the required scope. We review the information to identify the applicable design deliverables and whether structural or electrical engineering services are needed.

  3. Prepare the plan set. SPS develops the drawings and supporting documentation included in your selected package.

  4. Submit to the appropriate authority. You or your contractor submits the applicable documents to the City and, separately, to Fort Collins Utilities through its interconnection process.

  5. Address applicable review comments. SPS can assist with revisions covered by your service agreement.

  6. Complete inspections and utility approval. After installation, the responsible contractor or project owner coordinates the required inspections and utility steps. Permission to Operate (PTO) is granted through the applicable utility process after its requirements are met.

Important: A completed plan set is not the same as an issued permit or utility Permission to Operate. Approval depends on the reviewing authorities and completion of the applicable project requirements. Follow the current approval instructions before beginning installation.

Why Work With Solar Permit Solutions?

Solar installers and project owners need documentation that reflects the actual system being proposed—not just a generic set of drawings.

SPS helps streamline the design and documentation stage with:

  • Project-specific plan sets: Drawings prepared from the property, equipment, and system details provided.

  • Residential and commercial support: Services for projects of different sizes and configurations.

  • Engineering coordination: Professional engineering services when required and included in the agreed scope.

  • A clear deliverable scope: Understand which drawings, calculations, stamps, and revisions are included before work begins.

  • Support with applicable revisions: Help responding to plan-review comments covered by your service package.

SPS is a solar design and permitting service provider, not a solar installation contractor or the permitting authority. Installation, permit submission, site work, inspections, and utility coordination are handled according to the responsibilities agreed upon for each project.

What We Need to Quote Your Solar Permit Plans

To help us assess your project and provide an accurate quote, please prepare the following information where available:

  • Project address and jurisdiction.

  • Residential or commercial project type.

  • Proposed system size and solar panel quantity.

  • Solar module, inverter, battery, and mounting equipment specifications.

  • Roof type and available roof framing details, or ground-mount structure information.

  • Existing site plans, electrical drawings, or other project documents.

  • Any comments or requirements already received from the City, utility, or fire authority.

  • Whether you need permit-ready drawings only or additional engineering, permit, or interconnection support.

You do not need to have every item ready to request an initial quote. We can identify missing information as we review your project requirements.

Request Solar Permit Design Services in Fort Collins

Planning a solar installation in Fort Collins? Send us your project details so we can review the scope, identify the design documentation needed, and provide a quote for the services that fit your project.

Request a Quote

You can also review our solar design pricing to learn more about available services.

Call (720) 703-9628 to discuss your solar permit design needs.

Ready to Start Your Solar Project in Fort Collins, CO?

Get professional, permit-ready plan sets designed for your local building department requirements. PE-stamped plans delivered in 2-5 business days.

Frequently Asked Questions — Fort Collins, CO

What solar permit services do you offer in Fort Collins, CO?

We provide complete solar permit design packages for Fort Collins, CO, including site plans, electrical diagrams, structural details, and PE-stamped engineering documents. Our designs are accepted by local building departments and AHJs.

How long does it take to get my permit plans?

Most residential permit plan sets are completed within 2-5 business days. Commercial projects may take 5-10 business days depending on complexity. Rush services are available.

Do you handle the permit submission process?

We design your permit-ready plan set so you or your contractor can submit it directly to your local building department. We also provide support if the AHJ requests revisions.

What information do I need to get started?

To get started, we need your property address, proposed system size, equipment specifications (panels, inverters, racking), and roof type. Submit these details through our online intake form for a quick quote.